La Crosse Technology WS-7078UF Manual do Utilizador

WS-7078UF Wireless 433 MHz Radio-controlled Weather Station Instruction Manual

10 D. Time There are two methods by which the time can be set: 1. Automatically via WWVB reception, or 2. Manually. 1. WWVB (Remote Control Tim

11increasing the minutes by increments of 1 with each press of the “CH” button. g. Press and release the “SET” button to confirm the minutes and to

1212. The default-year will be flashing. 13. Press and release the “CH” button to set the current year. 14. Press and release the “SET” button to

13 I. Weather Forecast The weather forecasting feature is estimated to be 75% accurate. The weather forecast is based solely upon the change of

14 There are 3 possible weather icons that will be displayed in the FORECAST LCD: Sunny—indicates that the weather is expected to improve (not th

15The current indoor temperature (viewed on the left) and relative humidity (viewed on the right) are displayed in the INDOOR LCD. The comfort level

16temperature (along with the humidity measured at that time) and the time and date of occurrence are displayed. The maximum records will display fo

17 A. Setting the Alarm (Alarms 1 and 2) Note: There are two alarms that can be set. Each alarm will sound for a complete duration of 2 minutes.

181. The snooze function is activated by pressing any one of the following buttons: “SET”, “IN”, “OUT” or “SNZ”. 2. To turn the alarm off completel

19 B. Viewing and Operating with Multiple Thermo/hygro Sensors 1. To view the temperature of a different remote thermo/hygro sensor press and rel

2TABLE OF CONTENTS Topic Page Inventory of Contents/Additional Equipment 3 About WWVB 4 Quick Set-Up Guide 5 Detailed Set-Up Guide Battery Install

20Note: Before permanently mounting ensure that the indoor weather station is able to receive WWVB signals from the desired location. Also, extreme

218. Fit the mounting post (on the back of the remote thermo/hygro sensor) into the receptor of the mounting bracket. B. Mounting With Adhesive Ta

22Problem: No reception of WWVB time signal. Solution: 1) Wait overnight for signal. 2) Be sure indoor weather station is at least 6 feet from any el

23• Extreme temperatures, vibration, and shock should be avoided to prevent damage to the units. • Clean displays and units with a soft, damp cloth

24SPECIFICATIONS Temperature measuring range: Indoor: 32°F to 139.8°F with 0.2°F resolution. (0°C to 59.9°C with 0.1°C resolution). “OFL” displaye

25WARRANTY INFORMATION La Crosse Technology, Ltd provides a 1-year limited warranty on this product against manufacturing defects in materials and wo

26PUBLIC INFORMATION. THIS PRODUCT IS NOT A TOY. KEEP OUT OF CHILDREN’S REACH. This warranty gives you specific legal rights. You may also have o

3INVENTORY OF CONTENTS 1. The indoor weather station (Figure 1). 2. One TX4U remote thermo/hygro sensor with mounting bracket (Figure 2). 3. Th

4ABOUT WWVB (Radio Controlled Time) The NIST (National Institute of Standards and Technology—Time and Frequency Division) WWVB radio station is loca

5 QUICK SET-UP GUIDE Hint: Use good quality Alkaline Batteries and avoid rechargeable batteries. 1. Have the indoor weather station and remote the

6DETAILED SET-UP GUIDE BATTERY INSTALLATION A. Remote Thermo/hygro Sensor 1. Pull the cylindrical rain cover off the remote thermo/hygro sensor.

7PROGRAM MODE Programming Note: If 30 seconds is allowed to pass, or either the “IN” or the “OUT” buttons are pressed during programming modes the u

8A. 12 or 24 Hour Time Setting 1. Press and hold the “SET” button for 3 seconds or until “12h” or “24h” flashes in the DATE LCD. 2. Press and rel

9Note: There are more time zones represented by numbers than there are represented by 3 letter abbreviations. If you live in North America you need